INT-5
The Work Horse
The INT-5 is a real work horse. It will give you the power and performance you need for daily operations and ask for more. It is designed to be reliable and economical. The perfect model to start your fleet or add to it’s capacity.
Unit weight without chassis: 1,650 kg (3,600 lbs)
Standard Features
- 1620 mm (64”) Cab to Axle steel body
- 4 ton (8,800 lbs) winch
- Driver and passenger side manual controls
- Wheel scoops
- Fork receivers and 50 mm (2”) frame forks
- Safety chains
Options
- Tunnel box 610 mm (24’’)
- Dollies
- Extra 4 ton (8,800 lbs) winch
- Rear anchors mounted on the under lift
- Remote control
- In cab controls
- Extra frame forks
- Custom paint in 2 or more colors
- Extra tools (snatch blocks, chains, straps, hooks)
- Aluminum body
- LED working lights
- LED strobe lights
- LED lights inside toolbox
- Installation services and extended warranty
- Tow operators education & training
Gallery
Line Drawing
NOTE: Axle configuration is subject to local laws and regulations. All information in this document is for reference purposes only. Optional configuration might be shown.
Specifications
Underlift Specifications
Retracted capacity on forks 3.6 ton (8,000 lbs)
Retracted distance to the forks 785 mm (31″)
Extended capacity on forks 2.4 ton (5,200 lbs)
Extended distance to the forks 1731 mm (68″)
Negative tilt angle -11°
Tow Rating 3.4 ton (7,500 lbs)
Boom Specifications
Retracted capacity (at 32°) 8 ton (17,500 lbs at 30°)
Extended capacity (at 32°) 3.7 ton (8,000 lbs at 30°)
Maximum Lift angle 32°
Maximum Hook Height 2596 mm (102″)
Reach Past Tailboard 460 mm (18″)
Vehicle Recommendations
Front axle(s) weight (min) 3 ton (6,600 lbs)
Rear axle(s) weight (min) 4.5 ton (9,900 lbs)
Reccomended GVW 5 ton (11,000 lbs) to 7 ton (15,500 lbs)
Clear CA 1620 mm (64″)
Winch Specifications
Quantity 1 pcs
Pulling force (on 1st layer) 4 ton (8,800 lbs)
Winch type Planetary
Cable length 10 mm x 30 m (3/8″ x 100′)
Some optional equipment may be shown.
All ratings are based on structural and design factors only. Vehicle chassis capacity and capabilities can vary significantly, affecting the overall performance and rating of the unit. All chassis specifications are minimums, heavier specifications may be required depending on chassis and equipment weights. Please contact your nearest distributor for additional information.
Metro Tow Trucks Co. reserves the right to change, improve or modify products, which may change the specifications, models and feature availability at any time without notice and without obligation. Please contact your nearest distributor for additional information.
© Metro Tow Trucks. All rights reserved. This material may not be reproduced, displayed, modified or distributed without the express prior written permission of the copyright holder. For permission, contact Sales@MetroTowTrucks.com